Manufacturing & Production

Our Manufacturing Division consists of experienced consultants who have over ten years experience in recruiting Technical staff within the Manufacturing and Production sectors.

Manufacturing is the transformation of raw materials into finished goods, or intermediate processes involving the production or finishing of semi-manufactures, with such a large process involved, we are specialised to recruit for the whole spectrum. Therefore candidates such as Operatives, Toolmakers, Weld Engineers, Production Engineers, Commodity and Raw Materials Purchasing, Team Leaders, Operations Manager, Manufacturing Directors are finding employment through Probe on a daily basis.

  • Continuous Improvements
  • Six Sigma
  • Lean Manufacturing
  • JIT
  • CNC
  • Health & Safety
  • Cost Reduction
  • Waste Management
  • Toolmaking
  • Production Control

If you would like a confidential discussion surrounding strategic hiring for your organisation or your own career path we would be delighted to hear from you to determine how our services can assist you in finding the right solution so please call us on  0121 321 4311

Browse

6 Jobs Found

 

New exciting opportunity to join a global Manufacturing organisation based in Greater Manchester area.  This is an exceptional opportunity for a higher skilled Maintenance Electrician who holds strong programming and fault-finding abilities with Siemens & Allen Bradley PLC’S

This Maintenance Electrician position is commutable from the following locations: Warrington / Skelmersdale / Bolton / Wigan 

The Maintenance Electrician will be required to work the following Shift: Continental – 4on-4off systems – 2days-2nights. 12 hours Shift. 

Benefits the Maintenance Electrician will receive: 

  • Salary: £51,000 - £54,000  
  • Great Training and progression opportunities 
  • Company Pension 8% Contribution 
  • Medical
  • Healthcare 
  • Secured on site Parking 
  • Plenty of overtime 

The Maintenance Electrician will be responsible and hold the following experience: 

  • As mentioned, key to the role is the fault finding and programming experience with PLC’s / Hardware. Siemens & Allen Bradley 
  • Previous experience within a Manufacturing environment 
  • Maintain and install all electrical machinery 
  • Carry out planned preventative maintenance 
  • Complete maintenance work orders, use of CMMS systems 
  • Be able to communicate at all levels throughout the business 
  • Electrically Biased – but holding a split on the mechanical Side 
  • Knowledge of variable speed drives 
  • Must be able to read schematic drawings 
  • 17/18th IEE Wiring regulations 
  • Proven experience within a similar role 
  • Apprentice trained holding a HNC / HND in Electrical engineering 
 

New exciting opportunity to join a global Manufacturing organisation based in Greater Manchester Area.  This is an exceptional opportunity for a skilled Maintenance Engineer to join an already established maintenance team. 

The Maintenance Engineers position is commutable from the following locations: Warrington / Skelmersdale / Bolton / Wigan 

Shift the maintenance engineer will be required to work Shift Pattern 4 on 4 off - 2 x 12 hr days & 2 x 12hr nights, 5 * 18-day breaks fixed

Benefits the Maintenance Engineer will receive: 

  • Salary: £51.000- £54,000 DOE 
  • Great training and progression opportunities 
  • Company Pension Contribution 7%
  • Life Assurance 
  • Healthcare 
  • Secured onsite Parking 
  • Plenty of overtime 

The Maintenance Engineer will be responsible and hold the following experience:  

  • Maintain and install all mechanical plant & machinery in line with company requirements.
  • React quickly, diagnose & repair any mechanical related problems on the plant or equipment.
  • Carry out our planned preventative maintenance schedule on the full range of equipment within the site .
  • Ensure that all plant and machinery is kept in a good, safe working & clean condition.
  • Complete all relevant paperwork associated with the task being performed in a timely and accurate manner.
  • Carry out daily inspections as requested related to safety, air, steam and water leaks and complete repairs as necessary.
  • Report any problems regarding equipment and machinery immediately to the Engineering Team Leader.
  • Ensure that you are aware of the Company Health, Safety and Environmental policies and procedures and that you always adhere to them.
  • Complete Maintenance work orders, use of a CMMS system, Agility or similar
  • Experience with pneumatic & hydraulic equipment & systems
  • Knowledge of high-pressure steam boilers and systems
  • Welding skills such as MMA, TIG, MIG
  • General workshop skills, tools, lathe, milling etc.
  • Able to read schematic drawings
  • Some multi skilling would be advantageous
  • Ideally you will be Apprentice trained holding a HNC / City & guilds Level 3 in Mechanical engineering. 
 

Are you seeking a new opportunity within a busy & friendly environment? Are you a qualified CNC Programmer with proven experience programming FANUC and MAZATROL controls?, if so this may be the role for you. We are currently recruiting for a leading specialist organisation based in the North-West who are now looking to strengthen their already established Workshop team by recruiting an additional CNC Programmer. 

  • Position: CNC Programmer / Production Engineer 
  • Shift: Days only Monday to Friday – Early finish on Friday. 
  • Salary: £36,000 - £40,000
  • 33days holiday 
  • Pension
  • On-site parking 


This position is commutable from the following Area’s: Hyde / Ashton-Under-Lyne / Manchester / Altrincham / Stretford / Stockport 

Ideally the CNC Programmer / Production Engineer will hold the following: 

  • Previous experience with Programming on MAZAK & FANUC Controls 
  • Must be fully trained with proven experience 
  • Experience with generating and proving out programs on both CNC Lathes and vertical milling machines. 
  • Ability with Setting / operating / milling and turning – mainly FANUC and Mazatrol Controls. 
  • Able to work to engineering drawings and 3D Models 
  • Proven experience with programming MAZAK integrex multi axis turning centres. 
  • Experience in continuous improvement methodologies – Kaizen & 5S 
  • Ideally the CNC Programmer will be Apprentice trained holding a HND/HNC in Manufacturing Engineering. 
     
 

This is a new exciting opportunity to join a global manufacturing organisation based in the Greater Manchester Area.  This is an exceptional opportunity for a skilled Maintenance Engineer to join an already established maintenance team. 

The Maintenance Engineers position is commutable from the following locations: Warrington / Skelmersdale / Bolton / Wigan 

The Maintenance Engineer will be required to work Days – 8am till 4pm. 

The benefits the Maintenance Engineer will receive: 

  • Salary: £40,000 - £42,500 
  • Great training and progression opportunities 
  • Company Pension 7% Contribution 
  • Life Assurance 
  • Health care 
  • Secured onsite Parking 
  • Plenty of overtime 
  • 33days holiday 

The Maintenance Engineer will be responsible for and hold the following experience:  


The purpose of the role is to provide engineering support to a dedicated range, responding to unplanned and planned process opportunities, independently troubleshooting and continuously improving the process to improve PR (efficiency and quality). 

  • Reporting key information in Engineering DMS review. 
  • Working with PPI and Production department to establish and improve DTM activities. 
  • Coaching and mentoring of Production Associates through DTM activity.  
  • Liaise and work with Reliability engineers on key projects associated to the range.  
  • Review and improvement of PM system linked to range.   
  • Establish and conduct line audits for key equipment.  
  • Assist a wider engineering team during MPS activities associated with the range (spare parts, lubrication, zero loss etc.). 
  • Take a lead on shutdown activity related to the range.  
  • Mechanical ‘call out support’ for range. (Grade 2 only)
  • Responsible for understanding ‘the why’ when we have mechanical breakdowns and delivering solutions to prevent reoccurrence 
  • Document abnormalities within the CMMS system and undertake the repair or liaise with the planner to schedule
  • Previous experience within a Similar position is key. 
  • Experienced within a FMCG / Manufacturing Plant. 
  • Must be Apprentice trained holding formal qualifications in mechanical engineering. 
  • Experienced with: Hydraulics & Pneumatics, Steam boilers, Welding and fabrication. 
 

New and exciting opportunity to join a global manufacturing organisation based in the Greater Manchester Area.  This is an exceptional opportunity for a skilled Maintenance Engineer to join an already established maintenance team. 

The Maintenance Engineers position is commutable from the following locations: Warrington / Skelmersdale / Bolton / Wigan 

Shift the maintenance engineer will be required to work Shift Pattern 4 on / 4 off - 2 x 12 hr days & 2 x 12hr nights, 5 * 18-day breaks fixed

The benefits the Maintenance Engineer will receive: 

  • Salary: £48,000 - £54,000 DOE 
  • Great training and progression opportunities 
  • Company Pension 
  • Secured on site Parking 
  • Plenty of overtime 

The Maintenance Engineer will be responsible for and hold the following experience:  

  • Maintain and install all mechanical plant & machinery in line with company requirements.
  • React quickly, diagnose & repair any mechanical related problems on the plant or equipment.
  • Carry out our planned preventative maintenance schedule on the full range of equipment within the site .
  • Ensure that all plant and machinery is kept in a good, safe working & clean condition.
  • Complete all relevant paperwork associated with the task being performed in a timely and accurate manner.
  • Carry out daily inspections as requested related to safety, air, steam and water leaks and complete repairs as necessary.
  • Report any problems regarding equipment and machinery immediately to the Engineering Team Leader.
  • Ensure that you are aware of the Company Health, Safety and Environmental policies and procedures and that you always adhere to them.
  • Complete Maintenance work orders, use of a CMMS system, Agility or similar
  • Experience with pneumatic & hydraulic equipment & systems
  • Knowledge of high-pressure steam boilers and systems
  • Welding skills such as MMA, TIG, MIG
  • General workshop skills, tools, lathe, milling etc.
  • Able to read schematic drawings
  • Some multi skilling would be advantageous
  • Ideally you will be Apprentice trained holding a HNC / City & guilds Level 3 in Mechanical engineering. 
 

New exciting and opportunity to join a global manufacturing organisation based in the Greater Manchester Area.  This is an exceptional opportunity for a highly skilled Maintenance Electrician who holds strong programming and fault-finding abilities with Siemens & Allen Bradley PLC’S

This Maintenance Electrician position is commutable from the following locations: Warrington / Skelmersdale / Bolton / Wigan 


The Maintenance Electrician will be required to work the following Shift: Continental – 4 on/4 off – 2days-2nights. 12 hours Shift. 


The benefits the Maintenance Electrician will receive: 

  • Salary: £54,000 - £57,000 
  • Great Training and progression opportunities 
  • Company Pension 
  • Secured on site Parking 
  • Plenty of overtime 

The Maintenance Electrician will be responsible for and hold the following experience: 

  • As mentioned, key to the role is the fault finding and programming experience with PLC’s / Hardware. Siemens & Allen Bradley 
  • Previous experience within a Manufacturing environment 
  • Maintain and install all electrical machinery 
  • Carry out planned preventative maintenance 
  • Complete maintenance work orders, use of CMMS systems 
  • Be able to communicate at all levels throughout the business 
  • Electrically Biased – but holding a split on the mechanical Side 
  • Knowledge of variable speed drives 
  • Must be able to read schematic drawings 
  • 17/18th IEE Wiring regulations 
  • Proven experience within a similar role 
  • Apprentice trained holding a HNC / HND in Electrical engineering