GROUP ELECTRICAL INSTALLATION & MAINTENANCE ENGINEER

New exciting opportunity to join a global Manufacturing organisation based in Greater Manchester area.  This is an exceptional opportunity for a higher skilled Maintenance Electrician who holds strong programming and fault-finding abilities with Siemens & Allen Bradley PLC’S

This Maintenance Electrician position is commutable from the following locations: Warrington / Skelmersdale / Bolton / Wigan 

The Maintenance Electrician will be required to work the following Shift: Continental – 4on-4off systems – 2days-2nights. 12 hours Shift. 

Benefits the Maintenance Electrician will receive: 

• Salary: £51,000 - £54,000  
• Great Training and progression opportunities 
• Company Pension 8% Contribution 
• Medical
• Healthcare 
• Secured on site Parking 
• Plenty of overtime 

The Maintenance Electrician will be responsible and hold the following experience: 

• As mentioned, key to the role is the fault finding and programming experience with PLC’s / Hardware. Siemens & Allen Bradley 
• Previous experience within a Manufacturing environment 
• Maintain and install all electrical machinery 
• Carry out planned preventative maintenance 
• Complete maintenance work orders, use of CMMS systems 
• Be able to communicate at all levels throughout the business 
• Electrically Biased – but holding a split on the mechanical Side 
• Knowledge of variable speed drives 
• Must be able to read schematic drawings 
• 17/18th IEE Wiring regulations 
• Proven experience within a similar role 
• Apprentice trained holding a HNC / HND in Electrical engineering 

We’re seeking a skilled Mechanical Maintenance Engineer to join one of the UK’s most respected textiles and manufacturing businesses. Be part of a respected industry leader with ongoing investment in technology and people, and a company who offer Supportive work environment with a focus on safety, quality, and sustainability.

The Mechanical Maintenance Engineer position is commutable from the following locations: Blackburn / Bolton / Oldham / Burnley

Shift in place:

The Maintenance Engineer will be required to work a Continental shift – 4on-4off – 2days – 2nights. 12-hour shift – working 7am till 7pm with 277 hours holiday.

Benefits the Mechanical Maintenance Engineer will receive:  

• Salary £49.576.80
• Generous holiday
• Service days included.
• Great Pension Contribution 10%
• Health care
• Plenty of Overtime – paying great rates / Parking / Canteen.
• Canteen serving hot food
• Sick pay

Requirements:

• Carrying out planned preventative maintenance (PPM) on factory machines.
• Overhaul, upkeep, and repair of all plant machines
• Responding to breakdowns
• Overhaul of gearboxes, pumps and motors, Temp Controllers, Granulator’s, Shredders.
• Repairs to pneumatics and hydraulics
• Previous experience as a Mechanical Maintenance Engineer/ Fitter in a manufacturing or production environment
• We are looking for a proactive individual who can work well within a team but also to their own initiative.
• Ideally the right individual with be Apprentice trained.
• Holding a NVQ Level 3 or City & Guilds in Mechanical engineering

This is an opportunity to join thriving textiles environment an opportunity to join a company that Value expertise and reward performances. A Leading UK-Based manufacturer Specialising in High quality textiles for a range of Industries. 

The Maintenance Electrician with be joining a well-established Maintenance Team. 

The Maintenance Electrician role is commutable from the following locations: Hyde, Denton, Manchester, Oldham, Middleton. 

The Maintenance Electrician with work the following Shifts: Rotating – 6am–2pm & 2pm–10pm

Benefits the Maintenance Electrician will receive: 

• Salary £44,000 
• 8% Pension Contribution
• Life Assurance
• 25 + 8 Days Holiday
• Bonus Scheme

Responsibilities:

• Carry out planned preventive maintenance (PPM) on electrical systems and equipment
• Respond to and diagnose breakdowns quickly and effectively
• Perform electrical fault-finding and repair across a variety of textile machinery
• Ensure compliance with health and safety standards at all times
• Work collaboratively with the wider maintenance and engineering teams
• Support continuous improvement projects and process efficiency initiatives
• Maintain accurate maintenance records and documentation

Experience: 

• We are looking for an Apprentice trained Maintenance Electrician 
• Qualified to a Level 3 in electrical engineering 
• Ideally coming from a Manufacturing / Textiles environment. 
• Strong Electrical fault-finding abilities. 
• Experienced with Textiles equipment. 

A fantastic new opportunity for an electrically-biased Maintenance Engineer to join a leading specialist manufacturer. This is an opportunity to join an established organisation who have 50+ years within the industry. This is an award-winning organisation who hold a very strong track record. 

This is an opportunity for a driven, motivated Engineer who is confident and holds strong electrical abilities, an opportunity to join an already established maintenance team. 

The Maintenance Electrician role is commutable from the following locations:  Rochdale / Bolton / Manchester / Oldham 

Benefits the Maintenance Electrician will receive: 

• Salary: £48,961    
• 6% Pension scheme 
• Life Assurance 
• 33days holiday
• Medical Care 
• Healthcare
• Overtime 

Shift in place: Days – Monday to Friday. 7:30am till 4pm – Early finish on a Friday. 

Call out system in place – you will be required to work a 1in5 call out system. 

Duties and requirements the Maintenance electrician will hold and be responsible for: 

• Previous experience within a similar role is essential to this role. 
• Strong fault-finding abilities. 
• Prove experience within a manufacturing environment. 
• Proven experience with: AC & DC Drives, Installation experience, Wire testing, Panel Building, Instrumentation. 
• Experienced with Siemens PLC’s – strong fault-finding abilities – Programming would be at an advantage.  
• Planned preventive maintenance. 
• Carry out routine servicing and inspection on all production machinery. 
• Carry out essential testing of equipment and systems. 
• Ideally holding experience with ATEX equipment. 
• Ideally, we are looking for a 70/30 split as there will be some mechanical requirements. 
• We are looking for an Apprentice trained maintenance electrician. 
• Holding a Formal qualification in Electrical engineering – City & Guilds Level 3 or NVQ Level 3 
• 17th / 18th IEE Wiring regulations. 
• City & Guilds 2391 Testing 
• UK Driving licence required / Travel to alternative sites required – all site located in within 5Miles of one another. 
• Must be happy to work the required call out system. Working 1in5 calls – this is split between engineers. 

This is an exceptional opportunity for an apprentice-trained Maintenance Electrician, an opportunity to join a global manufacturing organisation based in the North West, not only an opportunity to join a leading organisation but to also join an already established friendly maintenance team. 

Are you looking to join a company who continues to invest and are continuing to grow, then this may be the right move for you. 
 
The Maintenance Electrician position is commutable from the following locations: Rochdale / Oldham / Wigan / Blackburn / Bury 

The Maintenance Electrician will be required to work the following shift:  Days: 07:30am till 3:30pm    

Benefits the Maintenance Electrician will receive: 

• Salary: £45,000  
• 33days holiday 
• Health care 
• 8% Pension 
• Onsite parking 

Duties and requirements the Maintenance Electrician will hold and be responsible for: 

• Strong fault- finding abilities with Allen Bradley & Siemens S7 PLC’s 
• Experience with: Motors and Drives / Inverters / Single and 3 Phase systems. 
• Confident with both Hydraulics & Pneumatics / Bearings / Fluid systems / Steam systems / Press Machinery / Conveyor systems  
• Experienced with Motor testing. 
• We are ideally looking for the individual to hold a 60/40 Split – electrically biased. 
• Welding and machining experience would be at an advantage. 
• Previous experience within a Textiles / Manufacturing environment. 
• We are looking for an Apprentice trained engineer. 
• Holding a ONC / City & Guilds Level 3 in electrical engineering 
• Also holding their 18th IEE Wiring regulations. 
• Flexibility is key as there will also be a call out Rota in place – rotating Weekly. 

New exciting opportunity to join a global Manufacturing organisation based in Greater Manchester Area.  This is an exceptional opportunity for a skilled Maintenance Engineer to join an already established maintenance team. 

The Maintenance Engineers position is commutable from the following locations: Warrington / Skelmersdale / Bolton / Wigan 

Shift the maintenance engineer will be required to work Shift Pattern 4 on 4 off - 2 x 12 hr days & 2 x 12hr nights, 5 * 18-day breaks fixed

Benefits the Maintenance Engineer will receive: 

• Salary: £51.000- £54,000 DOE 
• Great training and progression opportunities 
• Company Pension Contribution 7%
• Life Assurance 
• Healthcare 
• Secured onsite Parking 
• Plenty of overtime 

The Maintenance Engineer will be responsible and hold the following experience:  

• Maintain and install all mechanical plant & machinery in line with company requirements.
• React quickly, diagnose & repair any mechanical related problems on the plant or equipment.
• Carry out our planned preventative maintenance schedule on the full range of equipment within the site .
• Ensure that all plant and machinery is kept in a good, safe working & clean condition.
• Complete all relevant paperwork associated with the task being performed in a timely and accurate manner.
• Carry out daily inspections as requested related to safety, air, steam and water leaks and complete repairs as necessary.
• Report any problems regarding equipment and machinery immediately to the Engineering Team Leader.
• Ensure that you are aware of the Company Health, Safety and Environmental policies and procedures and that you always adhere to them.
• Complete Maintenance work orders, use of a CMMS system, Agility or similar
• Experience with pneumatic & hydraulic equipment & systems
• Knowledge of high-pressure steam boilers and systems
• Welding skills such as MMA, TIG, MIG
• General workshop skills, tools, lathe, milling etc.
• Able to read schematic drawings
• Some multi skilling would be advantageous
• Ideally you will be Apprentice trained holding a HNC / City & guilds Level 3 in Mechanical engineering. 

An opportunity has a risen for a skilled Welder & Fabricator to join a leading Manufacturing organisation who are known worldwide. An opportunity to join an already established team and to join an organisation that pride themselves on a Friendly working environment. This is an opportunity to join a company who have been Established for over 50years who continue to grow and offer Stability and development and training. 

The Welder & Fabricators role is commutable from the following locations: Blackburn / Burnley / Preston.

The Welder & Fabricator will be required to work the following Shift:  Nights – Monday to Thursday 10pm till 7:30am 

Benefits the Welder & Fabricator will receive: 

• Salary: £39,144,56 
• Pension Contribution matched at 5.5% = 11%
• 32days holiday 
• Production Bonus Scheme 
• On site Gym. 
• Secured Parking. 
• Overtime. – Plenty available 

Key Requirements for the Welder & Fabricator:  

• Operate manual or semi-automatic flame-cutting equipment. 
• Use manual or semi-automatic welding equipment to fuse metal pieces using MIG/MAG and TIG processes. 
• Welding must meet both Fort vale’s Quality, and ASME standards. (Welders are tested every 6 months). 
• Maintain safe and clean working environment by complying with procedures, rules and regulations. 
• Manually handle weights up to 25kg. 
• Use of hand fettling/grinding tools. 
• Read and complete tasks to meet technical drawings, work with, and understand weld symbols and weld procedures (WPS). 
• May have contact with small amounts of grinding dust/welding fume containing stainless steel. 
• Mandatory Ear protection for welding and grinding processes & recommended for others. 
• Sets up and operates fabricating machines, such as press brakes, rolls, shears, flame cutters, and drill presses. 
• Fabricate and assemble sheet metal products. 
• Set up and operate machine tools associated with fabricating shops, such as radial drill press, end mill, and edge planer. 
• Bends and straighten metal by hammering, chipping and grinding it. We are looking for a Time served Welder & Fabricator. 
• Proven experience within FMCG / Manufacturing environment. 
• Skilled Welder & Fabricator 

I have a great opportunity for a mechanically-biassed Maintenance Engineer to join a leading company in Shopshire. 

My client is looking for a Maintenance Engineer to join their team on a continental shift pattern. The right person will be a multi-skilled Engineer with a mechanical bias, this role offers stability and progression routes.   

Maintenance Engineer Role Benefits:

• Salary £47,000 
• Premium overtime rate 
• 23 days holiday 
• 6% pension. 
• Training and progression opportunities.  
• Life assurance. 

Maintenance Engineer Duties include:

• Continental shift rota. 
• Improve and promote safety across site. 
• Carry out planned and preventive maintenance. 
• Fault find on mechanical and electrical equipment. 
• Respond to breakdowns. 
• Report on machinery faults. 
• Update CMMS. 
• Contact OEM’s and suppliers. 

Maintenance Engineer Requirements include: 

• Apprentice trained. (Mechanical or Electrical). 
• Recognised engineering qualification. 
• Strong fault-finding capabilities. 
• CMMS experience. 
• Health & Safety / Food Safety.  
• Be knowledgeable in using quality assurance systems and standards. 
• PLC knowledge (advantageous) 

Please apply find out more about this role. 

This Maintenance Engineer position is commutable from: Wolverhampton, Bridgnorth, Telford, Newport, Shifnal, Stafford, Cannock, Shrewsbury and surrounding areas.

A fantastic opportunity for a maintenance engineer to join a global manufacturing company based near Stourport. My client is a multi-national UK firm supplying to stores across the UK and Europe.   

My client is looking for looking for a maintenance engineer to join their night shift, who will be responsible for the maintenance and repair of all production equipment, keeping down-time to a minimum. 

Maintenance Engineer Role Benefits:

• Salary £55,305
• 25 Days + BH 
• Company pension with Scottish Widows. 
• Free eyecare. 
• Death in service. 
• Critical illness cover. 
• Big retailer discounts. 
• Holiday purchase scheme. 
• Volunteering days. 

Maintenance Engineer Duties include:

• Monday – Friday (22:00 – 06:00) 
• Ensure all machines are running at all times.
• Diagnose and repair machine faults.
• Respond to breakdowns. 
• Carryout TPM and PPM work. 
• Open communication with shift leaders. 
• Reduce downtime and increase efficiency.

 
Maintenance Engineer Requirements include: 

• Recognised electrical qualifications. 
• PLC fault finding (Advantageous).  
• Hydraulics and Pneumatics experience. 
• Ability to read circuit diagrams.
• Experience with conveyors. 
• Single and Three phase power supplies. 
• AC and DC Drives. 

An overall brilliant opportunity to join a very well-established company in the Kidderminster area. If this sounds like the ideal opportunity for you, please apply to find out more details.  

This Maintenance Engineer position is commutable from:  Kidderminster, Droitwich Spa, Worcester, Bromsgrove, Stourport, Redditch and surrounding areas. 

Due to the retirement of a long-standing member of our team we are seeking to recruit an experienced Maintenance Technician to join our NIGHT SHIFT. 

We are a distinguished engineering organisation known for our stability, innovation and commitment to excellence. We have a proven track record of low staff turnover and take pride in our supportive work environment where our employees thrive. 

Benefits: 

• In return for your Maintenance skills and experience, we offer:-
• Base Salary of £48,000 
• Paid Overtime at Premium Rates
• Above Average Company Funded Pension Scheme
• Above Average Paid Holiday Entitlement
• Company Funded Healthcare
• Company Funded Life Assurance
• On Site Free Car Parking 
• Opportunity to work in a stable and thriving engineering sector

Requirements of a Maintenance Technician

You must be multi skilled in your abilities. Having gained your Maintenance experience from supporting plant and equipment within a fast paced manufacturing, process or production environment. 

Ideally you will be apprentice trained but must be qualified Electrically and have some understanding of Plc Controls. 

The Maintenance Technician role is commutable from Aldridge, Bloxwich, Walsall, Wednesbury, Willenhall & Wolverhampton.